Sur ce site

Sur le Web du CNRS

Accueil du site > Productions scientifiques


par Alexandre MARTIN - 2 avril 2010

2004 - 2005 - 2006 - 2007 - 2008 - 2009 - 2010 - 2011 - 2012 - 2013 - 2014

Année 2015

S. Tahéri, L. Vincent, J.-C. Le-Roux, Classification of metallic alloys for fatigue damage accumulation : a conservative model under strain control for 304 stainless steels, International Journal of Fatigue, 70:73-84, 2015.

A. Martin, J.B. Esnault, P. Massin, About the use of standard integration schemes for X-FEM in solid mechanics plasticity, CMAME, Volume 283, Pages 551-572, 2015.

S. Hazar, W. Zaki, Z. Moumni, G. Anlas, Modeling of steady-state crack growth in shape memory alloys using a stationary method, International Journal of Plasticity, 67, 26-38, 2015.

S. Andrieux, The Reciprocity Likelihood Maximization : a variational approach of the Reciprocity Gap method, accepted to, J. of Mechanics of Materials and Solids, Special issue in honor of HD. Bui

R. de La Vaissière, P. Gerard, J.P. Radu, R. Charlier, F. Collin, S. Granet, J. Talandier, M. Piedevache, B. Helmlinger, Gas injection test in the Callovo-Oxfordian claystone : data analysis and numerical modelling, accepted à, Geological Society Special Publication series.

Y. Jus, E. Longatte, J.C. Chassaing, P. Sagaut, Low-mass-damping Vortex-Induced Vibrations of a single cylinder at moderate Reynolds number, accepted à, Journal of Pressure and Vessel Technology.

D. Al Akhrass, S. Drapier, J. Bruchon and S. Fayolle, Integrating a logarithmic-strain based hyperelastic formulation into a three-field mixed finite elemnt formulation to deal with incompressibility in finite-strain elastoplasticity, accepted à, Finite Elements in Analysis and Design.

L. Peletan, S. Baguet, M. Torkhani, G. Jacquet-Richardet, Quasi-periodic harmonic balance method for rubbing self-induced vibrations in rotor–stator dynamics, accepted à, Nonlinear Dynamics, DOI 10.1007/s11071-014-1606-8.

S. Raude, F.Laigle, R.Giot, R.Fernandes, A unified thermo-plastic/viscoplastic constitutive model for geometarials, accepted à, Acta Geotechnica.

W. H. Woodward, S. Utyuzhnikov, P. Massin, On the Application of the Method of Difference Potentials to Linear Elastic Fracture Mechanics, accepted à, IJNME.

haut de page

Année 2014

V. Faucher, Advanced parallel strategy for strongly coupled fast transient fluid-structure dynamics with dual management of kinematic constraints, Advances in Engineering Software, 67:70-89, 2014.

V. Faucher, F. Crouzet, F. Debaud, Mechanical consequences of LOCA in PWR : full scale coupled 1D/3D simulations with fluid-structure, Nuclear Engineering and Design, 270 : 359-378, 2014.

T.N. Baranger, S. Andrieux, R. Rischette, Combined energy method and regularization to solve the Cauchy Problem for the heat equation, Inverse Problems in Sciences and Engineering, 22(1):199-212, 2014.

S. Ziada, P. Lafon, Flow-excited acoustic resonance excitation mechanism, design guidelines and counter measures, Applied Mechanics Reviews (ASME), Vol. 66, Issue 1, 22 pages, doi:10.1115/1.4025788, 2014.

F. Daude, P. Galon, Z. Gao, E. Blaud, Numerical experiments using a HLLC-type scheme with ALE formulation for compressible two-phase flows five-aquation models with phase transition, Computers & Fluids, 94:112-138, 2014.

F. Poirion, I. Zentner, Stochastic model construction of observed random phenomena, Probabilistic EngineeringMechanics, 36:63–71, 2014.

J-B. Esnault, V. Doquet, P. Massin, A three-dimensional analysis of fatigue crack paths in thin metallic sheets, International Journal of Fatigue, 62:119-132, 2014.

G. Ferté, P. Massin, N. Moës, Convergence analysis of linear or quadratic X-FEM for curved free boundaries, 278:794–827, CMAME, 2014.

G. Ferté, P. Massin, N. Moës, Interface problems with linear or quadratic X-FEM : design of a stable multiplier space and error analysis, IJNME, Vol. 100, Issue 11, pages 834–870, 2014.

I. Zentner, A procedure for simulating synthetic accelerograms compatible with correlated and conditional probabilistic response spectra, Soil Dynamics and Earthquake Engineering, 63:226–233, 2014.

E. Longatte, F. Baj, Physical investigation of square cylinder array dynamical response under single-phase cross-flow, Journal of fluids and structures, 47, 86-98, 2014.

V. Shinde, T. Marcel, Y. Hoarau, T. Deloze, G. Harran, F. Baj, J. Cardolaccia, J.P. Magnaud, E. Longatte, M. Braza, Numerical simulation of the fluid-structure interaction in a tube array under cross flow at moderate and high Reynolds number, Journal of Fluid and Structures, 47, 99-113, 2014.

N. Valoroso, G. Debruyne, J. Laverne, A cohesive zone model with rate-sensitivity for fast crack propagation, Mechanics Research Communications, 58:82-87, 2014,

B.-M. Lei, V.-X. Tran, S. Tahéri, L. Wan, Y. Zhou, Effects of biaxial mean stress on the critical plane orientation under biaxial tension/compression fatigue loading conditions, International Journal of Fatigue, 66:194–206, 2014.

B.-M. Lei, V.-X. Tran, S. Tahéri, L. Wan, Y. Zhou, An analytical study on cracking directions and damage in thermal fatigue crazing subjected to variable amplitude loadings, Journal of Materials Science, Vol. 49, Issue 16, pp. 5546-5563, DOI 10.1007/s10853-014-8249-5, 2014.

L. Divaret, O. Cadot, P. Moussou, O. Doaré, Normal forces exerted upon a long cylinder oscillating in an axial flow, 752:649-669, Journal of Fluid Mechanics, DOI 10.1017/jfm.2014.342.

T.-H. Pham, V.-X. Tran, G. Chretien, C. Gardin, C. Sarrazin-Baudoux, J. Petit, Near-threshold fatigue propagation of physically through-thickness short and long cracks in a low alloy steel, Journal of Materials Science, DOI 10.1007/s10853-014-8582-8, 2014.

L. Jason, B. Masson, Comparison between continuous and localized methods to evaluate the flow rate through containment concrete structures, Nuclear Engineering and Design, Vol. 277, pp. 146-153, 2014.

I. Zentner, E. Borgonovo, Construction of variance-based metamodels for probabilistic seismic analysis and fragility assessment, Georisk 8:3, 202-216, 2014.

A.-T. Dau, I. Nistor, A. Gavrus, Numerical Analysis concerning the harmfulness of crack turbine rotors using a multi-scale approach based on a dynamic finite element method, Applied Mechanics and Materials, Vol. 656, pp. 315-324, 2014.

R. Abdelmoula, G. Debruyne, Dynamic crack growth and arrest in a DCB specimen using a modal decomposition for a material with Homogeneous fracture and heterogeneous properties, International Journal of Fracture, Vol. 188:187–202, 2014.

L. Divaret, P. Moussou, Julien Berland, Hassan Berro, Olivier Cadot, Olivier Doaré, Forces exerted on a cylinder in near-axial flow, J. Pressure Vessel Technol.., 136(5):051306-051306-6, 2014.

V. Faucher, P. Galon, A. Beccantini, F. Crouzet, F. Debaud, T. Gautier, Hybrid parallel strategy for the simulation of fast transient accidental situations at reactor scale, Annals of Nuclear Energy, In Press, available online 22 August 2014

C. Touzé, M. Vidrascu and D. Chapelle, Direct finite element computation of non-linear modal coupling coefficients for reduced-order shell models, Computational Mechanics, vol. 54(2), 567-580, 2014.

M. Ducceschi, O. Cadot, C. Touzé and S. Bilbao, Dynamics of the wave turbulence spectrum in vibrating plates : A numerical investigation using a conservative finite difference scheme, Physica D, vol. 280-281, 73-85, 2014.

M. Ducceschi, C. Touzé, S. Bilbao and C.J. Webb, Nonlinear dynamics of rectangular plates : investigation of modal interaction in free and forced vibrations, Acta Mechanica, vol. 225(1), 213-232, 2014.

M. Monteil, C. Touzé, O. Thomas and S. Benachio, Nonlinear forced vibrations of thin structures with tuned eigenfrequencies : the cases of 1:2:4 and 1:2:2 internal resonances, Nonlinear Dynamics, vol. 75(1-2), 175-200, 2014.

M. Grandemange, M. Gohlke, and O. Cadot, Turbulent wake past a three-dimensional blunt body. part 2. experimental sensitivity analysis, Journal of Fluid Mechanics 752 : 439-461, 2014.

O. Cadot, L. Pastur, A. Evrard, Steady imperfect bifurcation with generic 3D bluff bodies at large Reynolds numbers, Bulletin of the American Physical Society, 2014, vol. 59, 2014.

M. Grandemange, M. Gohlke, O. Cadot, Statistical axisymmetry of the turbulent sphere wake. Experiments in Fluids, 55(11), 1-11, 2014.

M. Grandemange, D. Ricot, C. Vartanian, T. Ruiz, O. Cadot, Characterisation of the flow past real road vehicles with blunt afterbodies, International Journal of Aerodynamics, 4(1), 24-42, 2014.

Z. Moumni, W. Zaki, Q.S. Nguyen, W. Zhang, Modeling of materials capable of solid-solid phase transformation. Application to the analytical solution of the semi-infinite mode III crack problem in a phase-changing solid, International Journal of Non-Linear Mechanics, 2014.

X. Chen, Z. Moumni, Y. He, W. Zhang, A three-dimensional model of magneto-mechanical behaviors of martensite reorientation in ferromagnetic shape memory alloys, Journal of the Mechanics and Physics of Solids, 64, 249-286, 2014.

X. Gu, W. Zaki, C. Morin, Z. Moumni, W. Zhang, Time Integration and Assessment of a Model for Shape Memory Alloys Considering Multiaxial Nonproportional Loading Cases, International Journal of Solids and Structures, 2014.

H. Yin, Y. He, Q. Sun, Effect of deformation frequency on temperature and stress oscillations in cyclic phase transition of NiTi shape memory alloy, Journal of the Mechanics and Physics of Solids, 67, 100-128, 2014.

B. Nedjar, On finite strain poroplasticity with reversible and irreversible porosity laws : Formulation and computational aspects, Mechanics of Materials, 68, 237-252, 2014.

B. Nedjar, Plasticity-based modelling of fibre/matrix debonding in unidirectional composites, Composite Structures, 108, 41-48, 2014.

B. Nedjar, N. Kotelnikova-Weiler, I. Stefanou, Modeling of unidirectional fibre-reinforced composites under fibre damage, Mechanics Research Communications, 56, 115-122, 2014.

K. Pham, An energetic formulation of a one-dimensional model of superelastic SMA, Continuum Mechanics and Thermodynamics, 1-25, 2014.

haut de page

Année 2013

E. Borgonovo, I. Zentner, A. Pellegri, S. Tarantola, E. de Rocquigny, On the importance of uncertain factors in seismic fragility assessment, Reliability Engineering and System Safety, Vol. 109, pp. 66–76, 2013.

R. Plassart , R. Fernandes, A. Giraud, D. Hoxha, F. Laigle, Hydromechanical modelling of an excavation in an underground research laboratory with an elasto-visco-plastic behaviour law and regularization by second gradient of dilation, International Journal of Rock Mechanics and Mining Sciences, vol 58, pp23-33, 2013.

A. Ghanem, M. Torkhani, N. Mahjoubi, T.N. Baranger, Arlequin framework and multi-scale/schema time integrators for structural transient dynamics, CMAME, Vol. 254, pp. 292–308, 2013.

V.-X. Tran, S. Geniaut, E. Galenne, I. Nistor, A Modal Analysis for Computation of Stress Intensity Factors under Dynamic Loading Conditions at Low Frequency using eXtended Finite Element Method, Engineering Fracture Mechanics, Vol. 98, pp. 122-136, 2013.

L. Peletan, S. Baguet, M. Torkhani, G. Jacquet-Richardet, A comparison of stability computational methods for periodic solution of non linear problems with application to rotordynamics, Non Linear Dynamics, Vol. 72, n°3 , pp. 671-682, 2013.

G-J. Richardet, M. Torkhani, P. Cartraud, F. Thouverez, T.N. Baranger, M. Herran, C. Gibert, S. Baguet, P. Almeida, L. Peletan, Rotor to Stator contacts in turbomachineries. Review and application, Mechanical Systems and Signal Processing, Vol. 40, n°2, pp. 401-420, 2013.

E. Longatte, F. Baj, M. Braza, Y. Hoarau, D. Ruiz, C. Canteneur, Advanced numerical methods for uncertainty reduction on prediction of heat exchanger dynamic stability limits : review and perspectives, Nuclear Engineering and Design, Vol. 258, pp. 164– 175, 2013.

F. Crouzet, F. Daude, P. Galon, P. Helluy, J.-M. Hérard, O. Hurisse, Y. Liu, Approximate solutions of the Baer-Nunziato model, Esaim Proceedings, Vol. 40, pp. 63-82, 2013.

S. Andrieux, H.D. Bui, A. Constantinescu, Reciprocity Gap Method in Full-Field Measurements and Indentification in Solid Mechanics, edited by Michel Grédiac and François Hild, Wiley, ISBN 978-1-84821-294-7, pp. 363-378, 2013.

S. Andrieux, T. N. Baranger, Three dimensional recovery of stress intensity factors and anergy release rates from surface full field displacement, International Journal of Solids and Structures, Vol. 50, Issue 10, pp. 1523-1537, 2013.

I. Zentner, Simulation of non stationary conditional ground motion fields in the time domain. Georisk Vol. 7(1), 37-48, 2013.

F. Poirion, I. Zentner, Non-Gaussian Non-stationary models for natural hazard modeling. Applied Mathematical Modelling, Vol. 37(8), 5938-5950, 2013.

Y. Wadier, H.N. Le, R. Bargellini, An energy approach to predict cleavage fracture under non-proportional loading, Engineering Fracture Mechanics 97 (2013) 30–51.

L. Jason, A. Torre-Casanova, L. Davenne, X. Pinelli, Cracking behavior of reinforced concrete beams. Experiment and simulations on the numerical influence of the steel-concrete bond, International Journal of Fracture, 180, 2, pp. 243-260, 2013.

A. Torre-Casanova A., L. Jason, L. Davenne, X. Pinelli, Confinement effects on the steel-concrete bond strength and pull-out failure, Engineering Fracture Mechanics, 97, pp. 92-104, 2013.

M. Siavelis, M.L.E. Guiton, P. Massin, N. Moës, Large sliding contact along branched discontinuities with X-FEM, Computational Mechanics, Vol. 52, n°1, pp. 201-219, 2013.

P. Moussou, On the coincidence of the acoustical and of the mechanical natural frequencies of a pressure vessel, Journal of Pressure Vessel Technology, Vol. 135, n°3, 9 pages, doi:10.1115/1.4024014, 2013.

F. Caleyron, A. Combescure, V. Faucher, S. Potapov, SPH modeling of fluid-solid interaction for dynamic failure analysis of fluid-filled thin shells, Journal of Fluids and Structures, Journal of Fluids and Structures, Vol. 39, pp. 126-153, 2013.

C. Berdin, Z.Y. Yaoa, S. Pascal, Internal stresses in polycrystalline zirconia : Microstructure effects, Computational Materials Science, Vol. 70, pp. 140–144, 2013.

R. Rischette, T. N. Baranger, S. Andrieux, Regularization of the noisy Cauchy problem solution approximated by an energy-like method, International Journal of Numerical Methods in Engineering, Vol. 95, n°4, pp. 271–287, 2013.

I. Afgan, S. Benhamadouche, X. Han, P. Sagaut, and D. Laurence, Flow over a flat plate with uniform inlet and incident coherent gusts, J. Fluid Mech. vol. 720, pp. 457-485, 2013.

C. Combescure, H. Dumontet, F. Voldoire, Homogenised constitutive model coupling damage and debonding for reinforced concrete structures under cyclic solicitations, Int. J. Solids & Struct., Vol. 50, Issue 24, pp. 3861-3874, 2013.

J. Schwartz, O. Fandeur, C. Rey, Numerical approach of cyclic behavior of 316LN stainless steel based on a polycrystal modeling including strain gradients, International Journal of Fatigue, Vol.55, pp. 202-212, 2013.

R. Lacombe, S. Föller, G. Jasor, W. Polifke, Y. Aurégan, P. Moussou, Identification of Aero-Acoustic Scattering Matrices from Large Eddy Simulation. Application to Whistling Orifices in Duct, Journal of Sound and Vibration, Vol. 332, Issue 20, pp. 5059-5067, 2013.

haut de page

Année 2012

D. Clouteau, D. Broc, G. Devésa, V. Guyonvarh, P. Massin. Calculation methods to structure-soil-structure interaction (3SI) for embedded buildings : application to NUPEC tests, Soil Dynamics and Earthquake Engineering, Vol. 32, n°1, pp. 129-142, 2012.

V.-X. Tran, S. Geniaut, Development and Industrial Applications of X-FEM Axisymmetric Model for Fracture Mechanics, Engineering Fracture Mechanics, Vol. 82, pp. 135-157, 2012.

N. Tardieu, E. Cheignon, A Newton-Krylov method for solid mechanics, European Journal of Computational Mechanics, Vol. 8, n°2, pp. 1-15, 2012.

B. Carrier, S. Granet. Numerical modelling of hydraulic fracture problem in permeable medium using cohesive zone model, Engineering Fracture Mechanics, Vol. 79, pp. 312-328, 2012.

M. Torkhani, L. May, P. Voinis, Light, medium and heavy partial rubs during speed transients of rotating machines : numerical simulation and experimental observation, Mechanical Systems and Signal Processing, Vol. 29, pp. 45–66, 2012.

T. Chaise, J. Li, D. Nélias, R. Kubler, S. Taheri, G. Douchet, V. Robin, P. Gilles, Modelling of multiple impacts for the prediction of distortions and residual stresses induced by peening processes, Journal of Materials Processing Technology, Vol. 212, pp. 2080– 2090, 2012.

G. Lazaroni, R. Bargellini, P.-E. Dumouchel, J.J. Marigo, On the role of kinetic energy during unstable propagation in a heterogeneous peeling test, International Journal of Fracture, Vol. 175, Issue 2, pages 127-150, 2012.

S. Geniaut, E. Galenne, A simple method for crack growth in mixed mode with X-FEM, International Journal of Solids and Structures, Volume 49, Issue 15-16, pp. 2094–2106, 2012.

F. Daude, J. Berland, T. Emmert, P. Lafon, F. Crouzet, C. Bailly, A high-order finite-difference algorithm for direct computation of aerodynamic sound, Computers & Fluids, vol. 61, pp. 46-63, 2012.

M. David, J.J. Marigo, C. Pideri, Homogeneized interface model describing inhomogeneities located on a surface, Journal of Elasticity, Vol. 109, n°2, pp. 153-187, 2012.

P. Cacciola, I. Zentner, Generation of response-spectrum-compatible artificial earthquake accelerograms with random joint time-frequency distributions. Probabilistic Engineering Mechanics, Vol. 28, pp. 52-58, 2012.

I. Zentner, F. Poirion, Enrichment of seismic ground motion databases using Karhunen-Loève expansion, Earthquake Engineering and Structural Dynamics, Vol. 41, Issue 14, pp. 1945–1957, 2012.

S. Potapov, V. Faucher, L. Daudeville, Advanced simulation of damage of reinforced concrete structures under impact, EJECE (European Journal of Environmental and Civil Engineering), Vol. 16, Issue 9, pp. 1090-1101, 2012.

S. Andrieux, T. N. Baranger, Emerging crack front identification from tangential surface displacements, C.R. Mécanique, Vol. 340, 565-574, 2012.

Ph. Matheron, S. Chapuliot, L. Nicolas, V. Koundy, C. Caroli, Characterisation of PWR vessel steel tearing under severe accident condition temperatures, Nuclear Engineering and Design, Vol. 223, n°3, pp 263-277, 2012.

A. Casanova, L. Jason, L. Davenne, Bond slip model for the simulation of reinforced concrete structures, Engineering Structures, Vol. 39, pp. 66-78, 2012.

C. Stolz, N. Moes, A new model of damage : a moving thick layer approach, Int. Journal of Fracture, Vol. 174, n°1, pp. 49-60, 2012.

F. Caleyron, A. Combescure, V. Faucher, S. Potapov, Dynamic simulation of Damage-Fracture transition in SPH shells, International Journal for Numerical Methods in Engineering, Volume 90 N°6, pp 707-738, 2012.

L .Vincent, J.-C. Le Roux, S. Taheri, High cycle fatigue of 304 stainless steel at room temperature, International Journal of Fatigue, Vol. 38, pp. 84-91, 2012.

A. Belaatar, L. Taleb, A. Hauet, S. Taheri, Dependence of cyclic strain-stress curve on the loading history and interaction with the fatigue of the 304L stainless steel, Materials Science & Engineering A, Volume 536 N°28, pp. 170-180, 2012.

G. Debruyne, J. Laverne, P.-E. Dumouchel, Dynamic crack growth : analytical and numerical CZM approaches from basic tests to industrial structures, Engineering Fracture Mechanics, Vol. 90, pp. 1-29, 2012.

G. Serre, P. Lafon, X. Gloerfelt, C. Bailly, Reliable reduced-order models for time-dependent linearized Euler equations, Journal of Computational Physics, Vol. 231 Issue 15, pp. 5176-5194, 2012.

V. Faucher, F. Crouzet, P. Piteau, P. Galon, P. Izquierdo, Mechanical consequences of LOCA : experimental analysis of transient wave propagation through perforated plates, Nuclear Engineering & Design, Vol. 253, pp 1-11, 2012.

D. Colombo, P. Massin, Level set propagation for mixed mode crack advance, European Journal of Computational Mechanics, Vol. 21, Issue 3-6, pp. 219-230, 2012.

S. Cuvilliez, F. Feyel, E. Lorentz, S. Michel-Ponnelle, A Finite Element approach coupling a continuous gradient damage model and a cohesive zone model within the framework of quasi-brittle failure, CMAME, Vol. 237-240, pp. 244-259, 2012.

M. Siavelis, M. L. E. Guiton, P. Massin, N. Moës, Large sliding contact along branched discontinuities with X-FEM, publié on line à Computational Mechanics, DOI : 10.1007/s00466-012-0807-6.

A. Nieto Ferro, D. Clouteau, N. Greffet, G. Devésa, On a Hybrid Laplace-Time Domain Approach to Dynamic Interaction Problems, European Journal of Computational Mechanics, Vol. 21, Issue 3-6, pp. 290-299, 2012.

E. Lorentz, S. Cuvilliez, K. Kazymyrenko, Modelling large crack propagation : from gradient damage to cohesive zone models, Int. J. Fracture, Vol. 178, n°1-2, pp. 85-95, 2012.

haut de page

Année 2011

J. Colin, A. Fatemi, S. Tahéri. Cyclic hardening and fatigue behavior of stainless steel 304L. J. Mater Sci, Vol. 46, pp.145-154, 2011.

N. Mahjoubi, A. Gravouil, A. Combescure, N. Greffet, A monolithic energy conserving method to couple heterogeneous time integrators with incompatible time steps in structural dynamics, Comput. Methods Appl. Mech. Engrg., Vol. 200, pp. 1069-1086, 2011.

H. Ben Dhia, M. Torkhani, Modeling and computation of fretting wear of structures under sharp contact, International Journal for Numerical Methods in Engineering, Vol. 85, pp. 61-83, 2011.

A. Batou, C. Soize, M. Corus. Experimental identification of an uncertain computational dynamical model representing a family of structures. Computers & Structures 89, pages. 1440 – 1448, 2011.

E. Chamberland, A. Fortin, N. Tardieu, Solutions analytiques de problèmes de contact en grandes déformations, Mécanique et Industrie, Volume 11, Numéro 3-4, Mai-Août 2011.

E. Lorentz, V. Godard, Gradient damage models : toward full-scale computations, Comput. Meth. Appl. Mech. Engrg. 200, pp. 1927-1944, 2011.

E. Lorentz, S. Cuvilliez, K. Kazymyrenko, Convergence of a gradient damage model toward a cohesive zone model, CR Mécanique 339, pp. 20-26, 2011.

O. Angelini, C. Chavant, E. Chénier, R. Eymard, S. Granet, Finite Volume Approximation of a Diffusion-dissolution model and application to nuclear waste storage, Mathematics & Computers in simulation, Vol. 81, n°10, pp 2011-2017, 2011.

D. Colombo, P. Massin. Fast and robust level set update for 3D non-planar X-FEM crack propagation modelling, Comput. Meth. Appl. Mech. Engrg., Vol. 200, pages 2160-2180, 2011.

I. Zentner, N. Humbert, S. Ravet, E. Viallet, Numerical methods for seismic fragilitay analysis of structures and components in nuclear industry – Application to a reactor coolant system, Georisk, Vol. 5, n°2, 99-109, 2011.

J. Berland, P. Lafon, F. Daude, F. Crouzet, C. Bogey, C. Bailly, Filter shape dependance and effective scale separation in large-eddy simulations based on relaxation filtering, Computers & Fluids 47 (2011) 65–74.

S. Taheri, A. Hauet, L. Taleb, C. Kpodekon, Micro-macro investigations about the fatigue behaviour of pre-hardened 304L steel, International Journal of Plasticity, Vol. 27, pages. 1981-2004, 2011.

R. Lacombe, P. Moussou, Y. Aurégan. Whistling of an orifice in a reverberating duct at low Mach number, J. Acoust. Soc. Am., Vol. 130, Issue 5, pp. 2662-2672, 2011.

H.-D. Bui, On the mystery of Calderón’s formula for the geometry if an inclusion in elastic materials, Journal of Mechanics of Materials and Structures, Vol. 6, n°1-4, 2011, pp. 105-111, 2011.

S. Andrieux, H.-D. Bui, On some non linear problems in elasticity, Theoret. Appl. Mech, Vol. 38, N°2, pp. 125-154, Belgrade, 2011.

T. Baranger, S. Andrieux, Constitutive law gap functionals for solving the Cauchy problem for linear elliptic PDE, Applied Mathematics and Computation, 218, pp. 1970–1989, 2011.

N. Moes, C. Stolz, N. Chevaugeon, P.-E. Bernard, A level set based model for damage growth : the thick level set approach, International Journal for Numerical Methods in Engineering, vol 86(3), 358-380, 2011.

C. Stolz, Analysis of stability and bifurcation in non linear mechanics with dissipation, Entropy, Vol. 13, pp. 332-336, 2011.

M. Duclercq, D. Broc, O. Cadot, Characterization of long time fluctuations of forces exerted on an oscillating circular cylinder at KC=10, Journal of Fluids and Structures, Vol. 27, pp. 596-610, 2011.

haut de page

Année 2010

J. Colin, A. Fatemi, S. Taheri, Fatigue behavior of stainless steel 304L including strain hardening, pre-straining and mean stress effects, journal of engineering material and technology, april 2010, Volume 132, Issue 2, article n°021008 (13 pages).

A. Sbitti, S. Taheri, Crack arrest in high cycle thermal fatigue crazing, Nuclear Engineering and Design, 240 (2010) 30–38 .

A. Combescure, N. Mahjoubi, A. Gravouil, N. Greffet, A time variational method to couple heterogeneous time integrators, European Journal of Computational Mechanics, Volume 19, n°1-2-3, pages 11-24, 2010.

M. Siavelis, P. Massin, M. L. E. Guiton, S. Mazet, N. Moës, Robust implementation of contact under friction and large sliding with the eXtended Finite Element Method, European Journal of Computational Mechanics, Volume 19, n°1-2-3, pages 189-203, 2010.

O. Angelini, C. Chavant, E. Chénier, R. Eymard, A finite volume scheme for diffusion problems on general meshes ensuring monotony constraints, SIAM J. Numer. Anal. Volume 47, Issue 6, pp. 4193-4213 (2010).

J. Rousseau, P. Marin, L. Daudeville, S. Potapov, A discrete element/shell finite element coupling for simulating impacts on reinforced concrete structures, European Journal of Computational Mechanics, Volume 19, n°1-2-3, pages 153-164, 2010.

A. El maliki, M. Fortin, N. Tardieu, A. Fortin, Iterative solvers for 3D linear and non linear elasticity problems : displacement and mixed formulations, International Journal for Numerical Methods in Engineering, Volume 83, Issue 13, pp. 1780-1802, 2010.

M. Corus. Force Identification Using a Statically Completed Reduced Model Deriving From Tests, Journal of Sound and Vibration, Vol. 329, n°20, pp. 4149-4165, 2010.

I. Zentner, Numerical computation of fragility curves for NPP equipement. Nuclear Eng. Design 240(6), pp.1614-1621, 2010.

I. Zentner, S. Tarantola, E. de Rocquigny, Sensitivity analysis for reliable design verification of nuclear turbosets, Reliab. Eng. System Safety, Vol. 96, 391-397, 2010.

P. Moussou, R. J. Gibert, G. Brasseur, Ch. Teygeman, J. Ferrari, J. F. Rit. Instability of Pressure Relief Valves in Water Pipes, Journal of Pressure Vessel Technology, vol. 132, n° 4, pp.041308.1-041308.7, 2010.

J.-M. Carpreau, La fissuration consécutive à l’opération de soudage à l’arc. Matériaux & Techniques, Vol. 98, pp. 251-259, 2010.

M. Pomarede, E. Longatte, J.-F. Sigrist, Numerical simulation of an elementary vortex induced vibration problem by using fully-coupled fluid solid system computation, Int. Jnl. Of Multiphysics, 4(3), 273-291 (2010).

L. Jason, S. Ghavamian, A. Courtois, Truss vs solid modelling of tendons in concrete structures : impacts on the mechanical behaviour for a Representative Structural Volume, Engineering Structures, 32, pp.1779-1790, 2010.

S. Ghavamian, L. Jason, J. Bonenfant, Damage mechancis applied to the seismic behavior of concrete structures, European Journal of Environmental and Civil Engineering, vol.14, no. 6-7, pp. 839-854, 2010.

R. Desmorat, M. Chambart, F. Gatuingt, D. Guilbaud. Delay-active damage versus non-local enhancement for anisotropic damage dynamics computations with alternated loading, Engineering Fracture Mechanics, 77, pp. 2294–2315, 2010.

A. Fissolo, J.-M. Stelmaszyk, C. Gourdin, P. Bouin, G. Pérez. Thermal fatigue loading for a type 304-L stainless steel used for pressure water reactor : investigations on the effect of a nearly perfect biaxial loading, and on the cumulative fatigue life. Procedia Engineering, vol. 2 (2010), Issue : 1, pp. 1595-1604.

J. Schwartzz, O. Fandeur, C. Rey, Fatigue crack initiation modeling of 316LN steel based on non local plasticity theory, Procedia Engineering, Vol. 2, pp. 1353-1362, 2010.

J. Schwartzz, O. Fandeur, C. Rey, Fatigue initiation modeling of 316LN steel based on non local plasticity theory, Journal of ASTM International, Vol. 7, n°7, DOI : 10.1520/JAI102552, published on line (15 pages).

H.-D. Bui , S. Chaillat, A. Constantinescu, E. Grasso, Identification of a planar crack in Zener type viscoelasticity, Annals of Solid and Structural mechanics (2010) 1:3-8, DOI 10.1007/s 12356.009-0003-3.

H.-D. Bui , S. Chaillat, A new formulation of dynamic problem in Zener type viscoelasticity. 1rst International Review of Mechanical Engineering (ICOME) VIRTUAL FORUM, June 7 th -21 th , 2010, pp. 118-123.

H.-D. Bui , A. Oueslati, On the stick-slip waves under unilateral contact and Coulomb friction, Annals of Solid and Structural mechanics, DOI 10.1007/s 12356.010-0012-2 (2010).

C. Stolz, Thermodynamical Description of Running Discontinuities : Application to Friction and Wear, Entropy , Vol. 12, n°6, pp. 1418-1439,2010.

C. Stolz, Dual approach in non-linear fracture mechanics, International Journal of Fracture, Vol. 166, N°1-2, Pages 135-143, 2010.

C . Stolz, Closed form solution for finite anti-plane shear field for a class of hyperelastic incompressible brittle solid, Comptes Rendus Mécanique, Volume 338, Issue 12, Pages 663-669, 2010.

haut de page

Année 2009

I. Nistor, M. L. E. Guiton, P. Massin, N. Moës, S. Geniaut, An X-FEM approach for large sliding contact along discontinuities, International Journal for Numerical Methods in Engineering, vol. 78, n°12, pp. 1407-1435, 2009.

P. Koechlin, S. Potapov, Classification of soft and hard impacts, Nuclear Engineering and Design, Vol. 239, pp. 613-618, 2009.

S. Potapov, B. Maurel, A. Combescure, J. Fabis, Modeling accidental-type fluid-structure interaction problems with the SPH method, Computers and Structures, Vol. 87, pp. 721-734, 2009.

P. Testud, Y. Aurégan, P. Moussou, A. Hirschberg, The whistling potentiality of an orifice in a confined flow using an energetic criterion, Journal of Sound and Vibration, Vol. 325, Issues 4-5, pp. 769-780, 2009.

E. Longatte, V. Verreman, M. Souli, Time marching for simulation of fluid structure interaction problems, Journal of Fluids and Structures, 25 (1), 95-111, 2009.

B. Maurel, S. Potapov, J. Fabis, A. Combescure, Full SPH fluid-shell interaction for leakage simulation in explicit dynamics, International Journal for Numerical Methods in Engineering, vol. 80, pp. 210-234, 2009.

R. Bargellini, J. Besson, E. Lorentz, S. Michel-Ponnelle, A non local finite element based on volumetric strain gradient : application to ductile fracture, Computational Materials Science, Vol 45, pp. 762-767, 2009.

H.-D. Bui, S. Chaillat, On a nonlinear inverse problem in viscoelasticity, Vietnam Journal of Mechanics, VAST, Vol. 31, N°3&4, pp. 211-219, 2009.

T. Emmert, P. Lafon, C. Bailly, Numerical study of selfinduced transonic flow oscillations behind a sudden duct enlargment, Physics of Fluids, 2009, vol. 21, n°10, [Note(s):106105.1-106105.15] (33 ref.).

T. Baranger, S. Andrieux, Data completion for linear symmetric operators as a Cauchy problem : an efficient method via energy-like error minimization, Vietnam J. of Mechanics, VAST, Vol. 31, N°3-4, pp 247-261, 2009.

haut de page

Année 2008

G. Kooijmann, P. Testud, Y. Aurégan, A. Hirschberg, Multimodal method for scattering of sound at a sudden area expansion in a duct with subsonic flow, Journal of Sound and Vibration, Volume 310, Issues 4-5, 4 March 2008, Pages 902-922.

X. Gloerfelt, Ph. Lafon, Direct computation of the noise induced by a turbulent flow through a diaphragm in a duct at low Mach number, Computers and Fluids, Vol.37, Issue 4, pp.388-401, 2008.

H.-D. Bui, Duality and symmetry lost in solid mechanics, Comptes Rendus Mécanique, Vol. 336, pp.12-23, 2008.

E. Lorentz, J. Besson, V. Cano, Numerical simulation of ductile fracture : an efficient and robust implementation of the Rousselier constitutive law, Computer Methods in Applied Mechanics and Engineering, 197, pp. 1965-1982, 2008.

T. Baranger, S. Andrieux, An optimization approach for the Cauchy problem in linear elasticity, Journal Structural and Multidisciplinary Optimization, Vol. 35, n° 2, pp. 141-152, 2008.

H.-D. Bui, Renormalizations in solid and fracture mechanics, Journal of Mechanics of Materials and Structures, Vol. 3, n°5, pp. 853-866, 2008.

M. Kamaya, S. Taheri, A study on the evolution of crack networks under thermal fatigue loading, Nuclear Engineering and Design, 238, pp. 2147-2154, 2008.

P. Koechlin, S. Andrieux, A. Millard, S. Potapov, Failure criterion for reinforced concrete beams and plates subjected to membrane force bending and shear, European Journal of Mechanics A/Solids, 27, pp. 1161-1183, 2008.

R. Fernandes, C. Chavant, R. Chambon, A simplified second gradient model for dilatant materials : theory and numerical implementation, International Journal of Solids and Structures, 45, pp. 5289-5307, 2008.

E. Lorentz, A mixed interface finite element for cohesive zone models, Computer Methods in Applied Mechanics and Engineering, 198, pp302-317, 2008.

N. Tardieu, F. Youbissi, E. Chamberland, Un algorithme de Gradient Conjugué Projeté préconditionné pour la résolution de problèmes unilatéraux, Comptes-Rendus Mécanique, Volume 336, Issues 11-12, Pages 840-845, November-December 2008.

haut de page

Année 2007

P. Testud, P. Moussou, A. Hirschberg, Y. Aurégan, Noise generated by cavitating single-hole and multi-hole orifices in a water pipe, Journal of Fluids and Structures, Vol. 23, pp.163-189, 2007.

P. Massin, H. Andriambololona, D. Bosselut, Methodology for a numerical simulation of an insertion or a drop of the rod cluster control assembly in a PWR, Nuclear Engineering and Design, 237 (2007), pp.600-606.

E. Galenne, S. Andrieux, L. Ratier, A modal approach of fracture mechanics under dynamic loading at low frequency, Journal Sound and Vibration, Vol. 299, 1-2, pp 283-297, 2007.

P. Koechlin, S. Potapov, A global constitutive model for reinforced concrete plates, ASCE Journal of Engineering Mechanics, Vol. 133, n°3, pp.257-266, 2007.

S. Geniaut, P. Massin, N. Moës, A stable 3D contact formulation for cracks using X-FEM, Revue Européenne de Mécanique Numérique, (European Journal of Computational Mechanics), Special Issue : New trends in the development of the X-FEM, Vol. 16, n°2, pp.259-275, 2007.

P. Badel, V. Godard, J.-B. Leblond, Application of some anisotropic damage model to the prediction of the failure of some complex industrial concrete structure, International Journal of Solids and Structures, Vol.44, Issues 18-19, pp.5848-5874, 2007.

S. Taheri, Some advances on understanding of high cycle thermal fatigue crazing, ASME Journal Pressure and Vessels Technology, Vol.129, n°3, pp.400-410, 2007.

S. Andrieux, T. Baranger, An energy error-based method for the resolution of the Cauchy problem in 3D linear elasticity, Computer Methods in Applied Mechanics and Engineering, 197, 9-12, pp.902-920, 2007.

R. Desmorat, A. Kane, M. Seyedi, J.-P. Sermage, Two scale damage model and related numerical issues for thermo-mechanical high cycle fatigue, European Journal of Mechanics A/Solids, Vol.26, Issue 6, pp.909-935, 2007.

S. Chaillat, H.-D. Bui, Résolution des équations de la viscoélasticité linéaire en régime harmonique à l’aide des équations intégrales de frontière de Helmholtz réelles, Comptes Rendus Mécanique, Vol. 335, Issue 12, pp.746-750, 2007.

H.-D. Bui, Conservation laws, duality and symmetry loss in solid mechanics, International Journal of Fracture, Vol.147, pp.163-172, 2007.

haut de page

Année 2006

S. Taheri, M. Seyedi, F. Hild, Numerical modelling of crack propagation and shielding effects in a striping network, Nuclear Engineering and Design, Vol. 236, Issue 9, pp954-964, 2006.

S. Andrieux, A. Ben Abda, T. N. Baranger, Solving Cauchy problem by minimizing an energy-like functional, Inverse Problems 22, pp 115-133, 2006.

B. Andrier, E. Garbay, F. Hasnaoui, P. Massin, P. Verrier, Investigation of helix-shaped and transverse crack propagation of rotor shafts based on disk shrunk technology, Nuclear Engineering and Design, Vol..236, pp 333-349, 2006.

S. Andrieux, H.-D. Bui, Ecart à la réciprocité et identification de fissures en thermoélasticité isotrope transitoire, Comptes Rendus Mécanique, 334, pp 225-229, 2006.

P. Koechlin, S. Andrieux, A. Millard, S. Potapov, Perforation analysis of reinforced concrete plates under soft impact, Journal de Physique IV France, 134, pp 1295-1300, 2006.

D. Lidbury, A. Sherry, B. Bass, P. Gilles, D. Connors, U. Eisele, E. Keim, H. Keinanen, K. Wallin, D. Laureva, S. Marie, G. Nagel, K. Nilsson, D. Siegele, Y. Wadier, Validation of constraint-based methodology in structural integrity of ferritic steels for nuclear pressure vessels, Fatigue and Fracture of Engineering Materials and Structures 29, pp 829-849, 2006.

S. Woestyn, A. Delaplace, P. Koechlin, Analyse de la rupture fragile du béton par un modèle discret, Revue Européenne de Génie Civil, Vol. 10, n° 10, pp 1281-1308, 2006.

J. Laverne, M. Charlotte, J.-J. Marigo, Initiation of cracks with cohesive force models : a variational approach, European Journal of Mechanics, 25, pp 649-669, 2006.

P. Moussou, An attempt to scale the vibrations of water pipes, Journal of Pressure Vessel and Technology, Vol. 128, Issue 4, pp. 670-676, 2006.

haut de page

Année 2005

Q.-S. Nguyen, S. Andrieux, The non-local generalized standard approach : a consistent gradient theory, Comptes Rendus Mécanique, 333, pp139-145, 2005.

S. Andrieux, A. Ben Abda, T. Baranger, Data completion via an energy error functional, Comptes Rendus Mécanique, 333, pp171-177, 2005.

H.-D. Bui, A. Oueslati, The sliding interface crack with friction between elastic and rigid bodies, Journal of the Mechanics & Physics of Solids, 53, pp1397-1421, 2005.

P. Moussou, A kinematic method for the computation of the natural modes of Fluid-Structure Interaction systems, Journal of Fluids and Structures, 20, pp643-658, 2005.

E. Lorentz, Ill-posed boundary conditions encountered in 3D and plate finite element simulations, Finite Elements in Analysis and Design, 41, pp 1105-1117, 2005.

E. Lorentz, A. Benallal, Gradient constitutive relations : numerical aspects and application to gradient damage, Computer methods in applied mechanics and engineering, 194, pp 5191-5220, 2005.

H.-D. Bui, A. Constantinescu, H. Maigre, An exact inversion formula for determining a planar fault from boundary measurements, Journal of Inverse ill-posed Problems, Vol. 13 - n°6, pp 553-565, 2005.

S. Taheri, Le faïençage thermique à grand nombre de cycles, un phénomène lié à la structure. Revue Mécanique et Industries, Vol. 6 No. 3, pp 331-335, 2005.

E. Lorentz, V. Cano, A nonlocal formulation applied to ductile damage. Latin Journal of Solids and Structures, 2, pp. 17-27, 2005.

haut de page

Année 2004

E. Lorentz, P. Badel, A new path-following constraint for strain-softening finite element simulations, International Journal for Numerical Methods in Engineering, 60, pp499-526, 2004.

Y. Wadier, Reconsidering the paradox of Rice for linear strain hardening material, International journal of Fracture, Volume 127, No 1, L125-L132, 2004.

E. Lorentz, Y. Wadier, L’approche énergétique de la rupture élastoplastique appliquée à la modélisation de la propagation progressive ou brutale d’une entaille, La Revue Européenne des Eléments Finis, Vol. 13 - n°5-6-7, pp 583-592, 2004.

Y. Wadier, E. Lorentz, Mécanique de la rupture fragile en présence de plasticité : modélisation de la fissure par une entaille, Comptes Rendus Mécanique, 332, pp 979-986, 2004.

J. Laverne, J.-J. Marigo, Approche globale, minima relatifs et Critère d’Amorçage en Mécanique de la Rupture, Comptes-Rendus de Mécanique, 332, pp 313-318, 2004.

M.-K. Nguyen, T.-T. Truong, H.-D. Bui, J.-L. Delarbre, A novel inverse problem in gamma-ray emission imaging, J. Inverse Problems in engineering, 12(2), pp 225-246, 2004.

S. Moulin, P. Koechlin, S. Potapov, V. Faucher, Méthodologie de simulation d’impact sur un bâtiment industriel en béton armé, Revue Européenne des Eléments Finis, Vol.13, n° 5-6-7, pp 605-616, 2004.

haut de page